Anhydrous Ammonia Hoses from JGB


Parker/Dayco Anhydrous Ammonia Series 7261

Stainless Steel Reinforced

Anhydrous Ammonia Hose - Series 7261 - Stainless Steel Reinforced

Designed to handle anhydrous ammonia up to 350 PSI working pressure.
Corrosion resistant high tensile stainless steel braid provides strong and flexible reinforcement. Meets or exceeds RMA specifications.

5:1 Design factor

Applications:

Agriculture, Fertilizers

Tube:

Black EPDM

Reinforcement:

One or multiple stainless steel braids, 1 textile braid

Cover:

Perforated Black EPDM w/silver strip

Temperature:

-40° F to +180° F (-40° C to +82° C)

Branding:

(Side 1) PARKER USA 7261 SS ANHYDROUS AMMONIA-2003-REMOVE NO LATER THAN 2010-350 PSI MAX WP RMA(BATCH CODE)-CAUTION ANHYDROUS AMMONIA USE ONLY-2003-REMOVE NO LATER THAN 2010
(Side 2) Solid silver strip

Brand Description:

Side 1 - embossed, Side 2 - tape

Lengths:

1 in., 200 ft. nom. +/- 10%; 3 pcs. max., 45 ft. min. – 1-1/4 in., random 45 through 100 ft., 1 pc. per carton – 1-1/2 in. and 2 in. random lenghts, 150 ft. pack, max. 3 pieces, 40 ft. min. length – in cartons.

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure

Category:

Acid and Chemical, Anhydrous Ammonia Hose, NH3 hose

Part No. NOM. ID Reinf.
Braids
NOM. OD WEIGHT BEND RADIUS MAX. REC. WP Request a Quote
in. mm. in. mm. lbs./100ft. in. PSI
7261-1001 1 25.4 1 1.500 38.1 78 12.0 350 Request Quote
7261-1251 1-1/4 31.8 1 1.781 45.2 105 16.5 350 Request Quote
7261-1501K 1-1/2 38.1 1 2.032 51.6 114 20.0 350 Request Quote
7261-2002K 2 50.8 2 2.625 66.7 177 25.0 350 Request Quote



Parker/Dayco Anhydrous Ammonia Series 7262

Nylon Reinforced

Anhydrous Ammonia Hose - Series 7262 - Nylon Reinforced

Designed to handle anhydrous ammonia up to 350 PSI working pressure.
Degradation resistant tensile braids provide strong and flexible reinforcement.
Meets or exceeds RMA and TFI (The Fertilizer Institute) specifications.

5:1 Design factor

Application:

Agriculture, Fertilizers

Tube:

Black EPDM

Reinforcement:

Multiple nylon braids

Cover:

Perforated Black EPDM w/ green stripe

Temperature:

-40° F to +180° F

Branding:

(Side 1) PARKER USA 7262 Nylon ANHYDROUS AMMONIA-2003-REMOVE NO LATER THAN 2009-350 PSI MAX WP RMA(BATCH CODE)-CAUTION ANHYDROUS AMMONIA USE ONLY-2003-REMOVE NO LATER THAN 2009
(Side 2) Solid green stripe

Lengths:

1/2 in. through 1 in., random lengths on reels, 5 pc. max., 50 ft. min. – 1-1/4 in., random 45 through 100 ft., 1-1/2 in. and 2 in.random lengths in 150 ft. pack, max. 3 pieces, 40 ft. min. length – in cartons.

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Category:

Acid and Chemical, Anhydrous Ammonia Hose, NH3 hose


No. NOM. ID Reinf.
Braids
NOM. OD WEIGHT BEND RADIUS MAX. REC. WP Request a Quote
in. mm. in. mm. lbs./100ft. in. PSI
7262-502 1/2 12.7 2 .937 23.8 29 5.0 350 Request Quote
7262-752 3/4 19.1 2 1.250 31.8 47 8.0 350 Request Quote
7262-1002 1 25.4 2 1.500 38.1 57 10.0 350 Request Quote
7262-1252 1/4 31.8 2 1.750 44.5 68 12.0 350 Request Quote
7262-1502K 1-1/2 38.1 2 2.000 50.8 81 14.0 350 Request Quote
7262-2003K 2 50.8 3 2.750 69.9 166 16.0 350 Request Quote

 

WARNING! For Anhydrous Ammonia use ONLY. Do not use in LP Gas, Natural Gas or refrigeration applications. Do not use male swivel couplings. Use Parker recommended couplings ONLY!

WARNING! Contact with Anhydrous Ammonia will burn skin and is especially damaging to the eyes and lungs. This is true for its liquid and gaseous (vapor) state. Many accidents involving NH3 have occurred by using the wrong hose. NH3 hose must be specially compounded and constructed to handle the material. NEVER use a hose that is not designed for NH3 because it may fail very quickly and cause bodily injury. It is, therefore, especially important to make sure that only Anhydrous Ammonia hose is recommended and used for this service. Refer to RMA Publications IP-1 ; "Anhydrous Ammonia Hose, specifications" and IP-11-2 "Anhydrous, Ammonia Hose, Manual for Maintenance, Testing and Inspection".

Please feel free to contact us for more information.