Alfagomma Rubber Hose
T330AH / T330AA - 250 PSI EPDM Steam Hose

T330AH / T330AA - 250 PSI EPDM Steam Hose

Types:
Steam Hose


Vendor: Alfagomma Rubber Hose

Application:

The transfer of saturated steam up to 250 PSI AND 406°F.
Use with superheated steam will shorten hose life.
* Proper draining of steam hose after each use will increase service life.


* Not recommended for washdown applications where detergent or oils are present.

WORKING PRESSURE
Constant Pressure — 17 Bar (250 PSI)

Warning
Handling steam is very hazardous. If it is not properly controlled it can cause property damage, injury or even death. Selection for the proper application, usage, and maintenance will not only increase hose life but will insure safe operation for the user.

Tube:

Black, heat-resistant EPDM rubber.
Not for steam cleaner use.

Reinforcement:

High tensile steel cords.

Cover:

Red or black heat-resistant EPDM rubber. Wrapped cover fabric impression. Pin-pricked cover to allow venting.

Temperature:

-40 to 406 ºF
-40 to 210 ºC

Packaging:

Coils

Branding:

Embossed brand ALFAGOMMA – ITALY T330 17 BAR (250 PSI) STEAM – DRAIN AFTER USE - QTR/YEAR

Couplings:

Steel or malleable iron male insert NPT or female ground joint or washer type with spuds attached with 2 or 4 bolt interlocking clamps. Universal quick-acting couplings should not be used with steam hose.

Lengths:

50 or 100 feet

Colors:

Black or Red cover

Series No. Nominal ID Nominal OD Approx. WT.
lbs./100 ft.
Min. Bend
Radius (in.)
Request Quote
in. mm in. mm
T300AH/AA050 1/2 13 0.98 25 38 5 Request Quote
T330AH/AA075 3/4 19 1.26 32 49 7-1/2 Request Quote
T330AH/AA100 1 25 1.50 38 60 10 Request Quote
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov