Dixon Wilkerson Compact Filter Regulators
| Transparent Bowl and Guard / Metal Bowl with Sight Glass |
|
|
| Air Fittings | Dixon - Air Fittings |
Over-under units are space savers and provide for installation in tight areas. One common inlet/outlet for
both filter and regulator saves on piping costs.
 |
- 0-125 PSIG adjusting range
- 5 micron reusable element
- 5oz. bowl
- self-relieving standard
- diaphragm operated
- quick-disconnect bowl guard with integral plastic bowl and safety latch standard
- Two 1/4" gauge ports are provided in either side of the regulator body for installation of
a gauge or to use as an additional outlet port. Plug unused port(s).
- supplied with GC230 gauge
- maximum operating conditions:
- transparent bowl: 150 PSIG 10.3 bar) and 32°F to 125°F
(0°C to 52°C)
- metal bowl: 200 PSIG (13.8 bar) and 32°F to 150°F (0°C to 65.5°C)
|
| Size |
SCFM |
With Transparent Bowl and Guard
|
With Metal Bowl with Sight Glass |
| Automatic Drain |
Manual Drain |
Automatic Drain |
Manual Drain |
| Part # |
Part # |
Part # |
Part # |
| 1/4" |
64.0 |
CB6-02AG |
CB6-02MG |
CB6-02AGMB |
CB6-02MGMB |
| 3/8" |
70.0 |
CB6-03AG |
CB6-03MG |
CB6-03AGMB |
CB6-03MGMB |
| 1/2" |
70.0 |
CB6-04AG |
CB6-04MG |
CB6-04AGMB |
CB6-04MGMB |
 |
- 0-125 PSIG adjusting range
- 5 micron reusable element
- 4oz. bowl
- self-relieving standard
- spring-loaded diaphragm
- To increase regulated pressure, pull adjusting knob and turn [clockwise. To reduce
pressure, turn knob counter clockwise. To lock knob, push down.
- Two 1/4" gauge ports located on the front and rear faces of the body. These ports may
be used as additional regulated ports or for pressure gauges. Plug unused port(s).
- supplied with GC230 gauge
- maximum operating conditions:
- transparent bowl: 150 PSIG 10.3 bar) and 32°F to 125°F
(0°C to 52°C)
- metal bowl: 250 PSIG (13.8 bar) and 32°F to 150°F (0°C to 65.5°C)
|
| Size |
SCFM |
With Transparent Bowl and Guard
|
With Metal Bowl with Sight Glass |
| Automatic Drain |
Manual Drain |
Automatic Drain |
Manual Drain |
| Part # |
Part # |
Part # |
Part # |
| 1/4" |
88 |
B18-02AG |
B18-02MG |
B18-02AGMB |
B18-02MGMB |
| 3/8" |
117 |
B18-03AG |
B18-03MG |
B18-03AGMB |
B18-03MGMB |
| 1/2" |
121 |
B18-04AG |
B18-04MG |
B18-04AGMB |
B18-04MGMB |
 FRL’s are designed for air
service only, unless otherwise indicated.
SCFM ratings at 100 PSIG inlet pressure.
|
November 23, 2012 - JGB Enterprises plays role in Superstorm Sandy cleanup
