Hose and Hose Assemblies. JGB's Hose, Fitting, and Valves CatalogJGB Enterprises Inc. celebrates its 35 years. The owner, Jay G Bernhardt, founded the company in 1977 and we have grown the company into a leading defense contractor and commercial supplier in hoses and fittings
Request a Quote
 

Aeroquip S-TW Series Smooth Bore Hose

Hose VendorTypePhotograph
Aeroquip Chemical Hose (Suction and Discharge) Aeroquip S-TW Series Smooth Bore Hose
Click to view larger photo
Application:Meets SAE 100R14A

Hot air, steam, compressor discharge and most chemical applications. Not recommended for steam-cold water cycling.
   Tube:Extruded PTFE
   Reinforcement:Stainless steel single wire braid
Temperature:-65°F to +450°F (-54°C to +230°C)
Couplings:Contact JGB for proper fitting recommendation and coupling procedure

Part Number Hose I.D. Hose O.D. Maximum
Operating
Pressure		 Minimum
Burst
Pressure		 Minimum
Bend
Radius		 Vacuum
Service		 Weight
of Hose		 Request a Quote
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
S-4TW 4,8 0.19 7,6 0.30 210,0 3000 840,0 12000 50,8 2.00 94,8 28 0,09 0.06 Request Quote
S-5TW 6,6 0.26 9,4 0.37 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,12 0.08 Request Quote
S-6TW 8,1 0.32 10,9 0.43 175,0 2500 700,0 10000 101,6 4.00 94,8‡ 28‡ 0,15 0.10 Request Quote
S-8TW 10,7 0.42 13,7 0.54 140,0 2000 560,0 8000 127,0 5.00 94,8‡ 28‡ 0,18 0.12 Request Quote
S-10TW 13,0 0.51 16,0 0.63 105,0 1500 420,0 6000 165,1 6.50 94,8‡ 28‡ 0,24 0.16 Request Quote
S-12TW 16,3 0.64 19,3 0.76 84,0 1200 335,0 4800 190,5 7.50 94,8‡ 28‡ 0,27 0.18 Request Quote
S-16TW 22,4 0.88 26,2 1.03 70,0 1000 280,0 4000 228,6 9.00 40,6‡ 12‡ 0,35 0.26 Request Quote

‡ Maximum negative pressure for -16 and larger
are suitable for hose which has suffered no external
damage or kinking. If greater negative pressures are
required for -16 and larger hoses, the use of an internal
support coil is recommended. Use of an internal support coil
in -06 and larger PTFE hose is recommended for tube support
where extended or continuous service at high temperature
together with low or negative pressure is expected.

Copyright © 2000 - 2013 JGB Enterprises, Inc. All Rights Reserved

115 Metropolitan Drive, Liverpool, NY 13088 (Syracuse Area)
Largest INDUSTRIAL and HYDRAULIC HOSE Company in Syracuse, NY
Phone: 1 (315) 451-2770 Fax: (315) 451-8503  Contact us

NOTE: The product data on the web site is based on catalog information from the manufacturer.
JGB is not responsible for any errors or changes to that data made by the manufacturer.