Key Fire DOUBLE JACKET Contractors Hose - 400
|Key Fire Hose ||Fire Protection |
Click to view larger photo
|Application:||Key Fire DOUBLE JACKET Contractors Hose - 400 Mill Heavy Hose
|Lengths:||Standard lengths are 50, 75 and 100 feet.|
|Colors:||yellow, orange, red, tan, black, blue and green|
Quality: The fire hose assembly supplied under this specification shall be
constructed with superior quality materials. NFPA 1961 standards shall be
observed in production of the assembly, in order to ensure its quality and
Service Life: Hose furnished under these specifications will have a
potential service life warranty of not less than one year; barring mistreatment
that would render it unfit for service. Upon delivery, the hose shall be free
from defects in workmanship and materials. Any defective hose will be replaced
at no charge whatsoever.
The jackets will be woven evenly
and be free of defects, including knots, lumps, or unsightly disfigurations that
could jeopardize the integrity of the hose assembly. The warp yarn shall consist
of staple polyester yarn. The use of filament or entangled yarn is expressly
forbidden due to the lack of inherent abrasion resistance. The filler yarns
shall be constructed of high strength, low elongation, filament polyester to
reduce weight and increase flexibility.
Hose assemblies are available with polymer impregnation that provide additional abrasion
resistance. Colors include: yellow, orange, red, tan, black, blue and green.
Color shall be pure and even in each hose. Impregnated hose shall meet the
requirements of Mil-H-24606B for abrasion resistance.
The rubber lining shall be a single-ply extruded tube of synthetic rubber compounded to resist
ozone. The finished form shall be free of pits or other imperfections and have a
smooth finish. No reclaimed rubber shall be used. Plastic tubes that sacrifice
durability of the hose life for the sake of weight are not acceptable.
The backing shall be of adequate thickness to create a smooth waterway but not
greater than .020. The fire hose constructed under this specification shall be
manufactured fully backed.
As required by purchaser, expansion ring
threaded, STORZ clamp ring, etc.
For more information, please contact your JGB Sales Representative.
| Weights and Measures
per 50’ length
per 50’ length
** Customers are advised that special diameters or construction characteristics can be produced on special
request. For more information, please contact your JGB Sales Representative.