Parker Industrial
Anhydrous Ammonia Hose - Series 7261

Anhydrous Ammonia Hose - Series 7261

Type:  Chemical Hose

Sub Type:  Chemical Transfer Hose

Vendor:  Parker Industrial

Application:

Anhydrous Ammonia Hose Stainless Steel Reinforced
Series 7261

  • Anhydrous ammonia
  • In-plant and tank transfer, transport and delivery; fertilizer dispensing
  • Agriculture

Series 7261 is a premium anhydrous ammonia transfer hose. The hose construction incorporates corrosion resistant high tensile stainless steel and nylon braids for superior durability and service life. The perforated cover is resistant to abrasion, mild chemicals and ozone, and the distinctive silver stripe provides color-coded identification.

NOTES:
  • Contact JGB for additional chemical compatibility information, and for suitability for non-agricultural/industrial refrigeration applications.
  • Do not use with LPG or natural gas.
  • Series 7261 is a non-stock, seasonal product available only through Parker Select Anhydrous Ammonia Hose Assembly Fabricators.

Design Factor:  5:1
Vacuum:  Not recommended
Industry Standards:  ARPM IP-14

Tube:

Black EPDM

Reinforcement:

One or multiple stainless steel braids and one textile braid

Cover:

Black EPDM; perforated wrapped finish

Temperature:

-40°F to +180°F (-40°C to +82°C)

Packaging:

Coils (bulk hose available only to Parker Select Anhydrous Ammonia Hose Assembly Fabricators)

Branding:

PARKER SERIES 7261 SS ANHYDROUS AMMONIA - (YEAR) REMOVE NO LATER THAN (YEAR +7) - 350 PSI MAX WP ARPM (BATCH CODE) - CAUTION ANHYDROUS AMMONIA USE ONLY - (YEAR) REMOVE NO LATER THAN (YEAR +7)

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with silver stripe

Part Number ID ID Reinf Plies OD OD Approx Wt Min Bend Rad Max Rec WP Std Pack Request Quote
(in) (mm) (in) (mm) (lbs/ft) (in) (psi) Qty (ft)
7261-1001 1 25.4 2 1.5 38.1 0.65 12 350 50 Request Quote
7261-1252 1-1/4 31.8 2 1.781 45.2 0.85 16.5 350 50 Request Quote
7261-1501K 1-1/2 38.1 2 2.03 51.6 1.02 20 350 50 Request Quote
7261-2002K 2 50.8 3 2.625 66.7 1.61 25 350 50 Request Quote
Hose Assemblies:  Available only from Parker Select Anhydrous Ammonia Hose Assembly Fabricators.

WARNINGS!

  • Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
  • For Anhydrous Ammonia use ONLY. Do not use in Liquid Petroleum Gas (LPG)/Propane or Natural Gas applications. Use only with couplings qualified by Parker. Do not use with couplings containing hidden o-rings such as male swivel couplings. For non-agricultural or refrigeration applications, contact JGB.
  • Contact with Anhydrous Ammonia (NH3) will burn skin and is especially damaging to the eyes and lungs. This is true for its liquid and gaseous (vapor) state. Many accidents involving NH3 have occurred by using the wrong hose. NH3 hose must be specially compounded and constructed to handle the media. NEVER use a hose that is not designed for NH3 because it may fail very quickly and cause bodily injury or death. It is especially important to ensure that only Anhydrous Ammonia hose is recommended and used for this service. Refer to ARPM Publications IP-14 "Anhydrous Ammonia Hose, Specifications" and IP-11-2 "Anhydrous Ammonia Hose, Manual for Maintenance, Testing and Inspection."
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov