Valves by Vendor Bradford Horizontal Rack and Pinion Stainless Steel Actuator

Printable version

Horizontal Rack and Pinion Stainless Steel Actuator

Valve Category	Manufacturer	Photograph
Stainless Steel Actuator	Bradford	Click to view a full size photo
Valve Subcategory
Stainless Steel Actuator
Replaceable top and bottom PTFE pinion bearings ensure low friction, stability above 400°F, and chemical resistance Travel stops provide 4° travel adjustment Precision cast stainless steel pistons are guided through full face engagement with the pinion and piston guide NAMUR slotted shaft is standard to provide a self-centering positive drive for positioners, a variety of switches Drive pinion is one piece stainless steel alloy shaft, precision machined gear and teeth for precise control ISO 5211 mounting Available in: Air to open / air to close (ATO/ATC) Air to open / spring to close (ATO/STC) Spring to open / air to close (STO/ATC) Part # Dimensions Request a Quote A (DA) A (SR) B C D E F G CH RP-BS-45* 6.54 7.56 2.56 1.15 1.15 2.56 0.787 3.34 0.433 Request Quote RP-BS-65* 7.00 7.34 2.92 1.39 1.39 3.18 0.787 3.97 0.551 Request Quote RP-BS-80* 7.81 8.37 3.97 1.91 1.91 4.24 0.787 5.03 0.748 Request Quote RP-BS-105* 9.91 10.53 4.75 2.29 2.29 5.23 0.787 6.02 0.748 Request Quote RP-BS-125* 11.66 12.20 5.39 2.69 2.69 6.09 1.181 7.27 0.866 Request Quote RP-BS-140* 14.17 19.29 6.26 3.11 3.11 6.89 1.181 8.07 1.063 Request Quote Part # Dimensions Request a Quote J L N M P S T V KK RP-BS-45* 1.42 3.15 0.58 1.181 1.97 10-24 ¼" NPT 0.633 1/4 x 20 Request Quote RP-BS-65* 1.97 3.15 0.59 1.181 n/a 1/4 x 20 ¼" NPT 0.633 n/a Request Quote RP-BS-80* 1.97 3.15 0.66 1.181 2.76 1/4 x 20 ¼" NPT 0.635 5/16 x 18 Request Quote RP-BS-105* 2.76 3.15 0.77 1.181 n/a 5/16 x 18 ¼" NPT 0.629 n/a Request Quote RP-BS-125* 2.76 5.12 0.97 1.181 4.02 3/8 x 16 ¼" NPT 0.865 3/8 x 16 Request Quote RP-BS-140* 4.02 5.12 1.18 1.181 4.92 3/8 x 16 ¼" NPT 0.865 1/2 x 13 Request Quote * - DA = double acting; - SR = spring return Note: All dimensions are in inches. Dimensions are approximate. Engineering dimensions are available upon request. Specifications are subject to change without notice.
First | Previous | Next | Last | Back to Top

NOTE: The product data on the web site is based on catalog information from the manufacturer.
JGB is not responsible for any errors or changes to that data made by the manufacturer.