Hose and Hose Assemblies. JGB's Hose, Fitting, and Valves CatalogJGB Enterprises Inc. celebrates its 35 years. The owner, Jay G Bernhardt, founded the company in 1977 and  we have grown the company into a leading defense contractor and commercial supplier in hoses and fittings
Request a Quote
Search Website 

Agriflex 660 - Lay Flat Large Diameter Hose (LDH)

Hydrofracking Water Transfer Hose - Lay  Flat  Frac Water Transfer Hose

 

FEATURES:

  • Large Diameter Layflat fresh water transfer hose

  • Designed for slurry manure transfer, hydraulic fracking and water transfer

  • Synthetic woven liner reinforcement

  • Protected and encapsulated in an extruded through the weave nitrile/pvc tube

  • Resistant to ozone and abrasion

  • Processed water/fresh water transfer

  • Lengths available to 660 feet

  • High working pressure

  • Oversized ID designed to fit most couplings



CONSTRUCTION:

Hose shall be made from 100 percent high tenacity synthetic polyester yarn, circularly woven and completely protected by a through-the-weave extruded PVC/Nitrile rubber, forming a single homogeneous construction without the use of glues or adhesives of any type. Agriflex features a thin rib construction to aid abrasion resistance. Agriflex shall carry a 3 year written warranty against defects in materials and workmanship. Lengths available to 660 feet.

Synthetic woven liner of high tenacity synthetic yarn totally protected and encapsulated in an extruded  through the weave nitrile/PVC tube. The special nitrile‐PVC elastomer has increased resistence to Ozone and Abrasion.

  Agriflex 660 - Lay Flat Large Diameter Hose (LDH) - Hydrofracking Water Transfer Hose - Lay Flat Frac Water Transfer Hose

Agriflex 660 - Lay Flat Large Diameter Hose (LDH) - Hydrofracking Water Transfer Hose - Lay Flat Frac Water Transfer Hose

 

Diameters: 4”, 4 1/2”, 5”, 6”, 7” 8” 10”
Applications:

Heavy duty use for soft hose travelers, liquid manuring and everyday heavy‐duty water delivery, frac water transfer, layflat fresh water transfer, hydrofracking water transfer.

Lining Properties  
Tensile Strength: Tensile strength of the lining shall not be less than 1200 PSI.
Elongation: When tested in accordance to UL-19 using certified tensile test apparatus, a small dumbbell sample of lining shall elongate a minimum of 400%.
Accelerated Aging Test: The tensile strength and ultimate elongation of the vulcanized rubber compound which has been subjected to the action of oxygen at a pressure of 300 PSI (±10 PSI) and a temperature of 158°(±18°F) for a period of 96 hours shall retain 60 percent of its originally stated properties.
Physical properties  
Abrasion Resistance: Hose shall withstand 10,000 cycles on the Taber Abrasion Machine (H-22 Wheel: 1/2 kg). JGB Enterprises on request will supply written warranties that Agriflex hose meets a minimum 10,000 cycles. Other abrasion test results (UL, DIN, etc.) can be supplied on request of purchaser.
Cold Resistance: Hose shall have a capability of use down to -35°F. Hose shall have no apparent damage to cover, reinforcement or lining when subjected to the following cold bending test: a 50 ft. length of dry hose is to be firmly coiled and placed in a cold box at -35°F for a duration of 24 hours. Immediately after removal of the hose from the box, hose should be uncoiled and laid out by one operator. Following this procedure, the hose shall not leak nor show any damage to the reinforcement when subjected to the hydrostatic acceptance test stated above.
Ozone Resistance: Hose shall show no visible signs of cracking to the lining or cover when tested in accordance to ASTM D518 Procedure B (100pphm/118°F/70 hours).
Chemical Resistance: Exposure to sea water and contamination by most chemical substances, hydrocarbons, oils, alkalis, acids and greases must have no effect on the short or long term performance of the hose.
Heat Resistance: The hose, when subjected to a static pressure of 100 PSI, shall be capable of withstanding a surface temperature of 1200°F for a minimum of one minute without rupture or damage to the synthetic reinforcement.
Color: The color shall be nato green. 7” diameter Agriflex shall be red. Available in military green.
Couplings: As required by purchaser. Hose designed for Pierce, Bauer, USC Hi-Flow, Victaulic field replaceable or crimped couplings.
Benefits: High abrasion resistance and flexability under load, increased ozone and uv resistance. operating temperature range of ‐4°F to +175°F
Type: Lay Flat Large Diameter Discharge Hose

 

*Inside diameter
inches
Weight/Pound Wall thickness
inches
Burst Test Bend Radius @ 70 psi Tensile strength in tons (US) Request a Quote
(4) *4 3/16” 0.90 0.140 750 psi 5.1 ft. 12.5 Request a Quote
(4.5) *4 11/16” 1.00 0.140 750 psi 5.4 ft. 14.0 Request a Quote
(5) *5 3/16” 1.10 0.140 600 psi 6.0 ft. 15.2 Request a Quote
(6) *6 3/16” 1.35 0.140 750 psi 6.4 ft. 18.9 Request a Quote
(7) *7 1/16” 1.85 0.140 600 psi 7.6 ft. 25.9 Request a Quote
(8) *8 3/16” 2.35 0.170 450 psi 10.0 ft. 26.1 Request a Quote
(10) *10 1/16” 3.30 0.175 450 psi 11.0 ft 41.7 Request a Quote

 

Note: Maximum working pressure is 3 x safety margin. Maximum working tensile is 4 x safety margin. Up to 660’. Maximum working pressure is 1/3 burst.

 

*Hose inside diameter is sized to match Pierce and Bauer fittings.