Hose and Hose Assemblies. JGB's Hose, Fitting, and Valves CatalogJGB Enterprises Inc. celebrates its 35 years. The owner, Jay G Bernhardt, founded the company in 1977 and we have grown the company into a leading defense contractor and commercial supplier in hoses and fittings
Request a Quote
 

Oroflex 20 Heavy Duty - Large Diameter Hose

 
Type: Liquid Transfer
Water, Liquid Manure, Industrial Sludges & Slurries, Contaminated Liquids, Fertilizers, Oils, Medium and Heavy Hydrocarbons, Diesel Fuels & Many Chemicals In Solution
Applications: Suitable for use and recommended for INDUSTRIAL and AGRICULTURE applications in:

  • Dewatering and operations
  • Water and hydrocarbons discharge applications
  • Water and hydrocarbons bypass operations
  • Refineries & chemical plants-(Resists Aromatics)
Not recommended or approved for fire fighting.
Construction: Circular polyester weave extruded internally and externally with NBR-PVC.
Hose shall be made from 100% high tenacity synthetic yarn circular woven and completely, protected and locked-in by tough highly resistant synthetic nitrile rubber, forming a single homogenous construction without the use of glues or adhesives of any type.
Lining Properties: a. Ultimate Tensile Strength:
    Tensile strength of the lining and cover shall not be less than 1500 psi (10,500 kpa ).
b. Ultimate Elongation:
    400% minimum.
c. Accelerated Aging Test:
    The tensile strength and ultimate elongation of the vulcanized rubber compound which has been subjected to the     action of oxygen at a pressure of 300 psi +/- 10 psi , (2100kpa +/- 70kpa) and temperature of 70 degrees centigrade    +/-1 degree centigrade (158 F +/- 18 F ) for a period of 96 hours shall be , greater than 60% of the original properties     stated.
Color Black ribbed
Temperature range: From -20°C to 80°C (-4°F to 176°F)
Elongation at WP: <1.5%
Expansion at WP: <6%
Abrasion: 6000 DIN cycles
Standard length: 200 m, 100 m (660 ft, 330 ft, 100 ft, 50 ft)

 

Nominal D* Working
Pressure		 Burst
Pressure		 End Pull ** Weight Thickness B.Radius at
W.P		 Request a Quote
Inch mm psi K Pa psi K Pa lb Kg lb/ft gr /m inch mm ft. mm
3/4 19 400 2800 1200 8200 1375 600 0,121 180 0,079 2,0 2,15 650 Request a Quote
1 265 400 2800 1200 8200 1725 750 0,168 250 0,091 2,3 2,97 900 Request a Quote
1 1/2 38 300 2100 900 6300 2750 1200 0,303 450 0,102 2,6 3,63 1100 Request a Quote
1 3/4 45 300 2100 900 6300 3200 1400 0,370 550 0,106 2,7 4,22 1280 Request a Quote
2 52 300 2100 900 6300 3450 1500 0,431 640 0,110 2,8 4,29 1300 Request a Quote
3 76 250 1700 750 5200 5950 2600 0,639 950 0,126 3,2 4,79 1450 Request a Quote
4 102 200 1400 600 4200 9850 4300 0,875 1300 0,134 3,4 5,91 1800 Request a Quote
5 125 200 1400 600 4200 11910 5200 1,278 1900 0,150 3,8 6,23 1900 Request a Quote
6 152 200 1400 600 4200 14200 6200 1,682 2500 0,165 4,2 6,56 2000 Request a Quote
8 203 175 1200 440 3000 15450 7000 2,355 3500 0,165 4,2 8,20 3000 Request a Quote
10 254 175 1200 440 3000 32200 14600 2,523 3750 0,157 4,0 9,84 3000 Request a Quote
12 305 175 1200 480 3300 38800 17600 3,028 4500 0,157 4,0 10,83 3300 Request a Quote

* Dimensional tolerance = Nominal Diameter + 0.080 “ mini
** Figures represent 35% of Total Effective Tensile Strength.


 

Copyright © 2000 - 2013 JGB Enterprises, Inc. All Rights Reserved

115 Metropolitan Drive, Liverpool, NY 13088 (Syracuse Area)
Largest INDUSTRIAL and HYDRAULIC HOSE Company in Syracuse, NY
Phone: 1 (315) 451-2770 Fax: (315) 451-8503  Contact us

NOTE: The product data on the web site is based on catalog information from the manufacturer.
JGB is not responsible for any errors or changes to that data made by the manufacturer.