Slim Hole Rotary and API Fittings

The new Slim Hole Rotary (SHR) is a high-pressure rotary hose for slim-hole, seismograph, work-over or portable drilling rigs. But more than that, it’s part of a complete line of Goodyear Engineered Products branded, precision-engineered hydraulic hose products. So there’s no worry about inconsistencies or parts that don’t fit. Our single-source solutions include all hydraulic hose, fittings and adapters – and it’s all backed with a global distributor network to offer service and support on a local basis.

Slim Hole Rotary Hose

Application:	High-pressure rotary hose for slim-hole, seismograph, work-over or portable drilling rigs. For use with small- to medium-blast, water-well or shot-hole drilling applications. Used in hydraulic oil, mud or air applications or where pulsating pump is required.
Inner Tube:	Neoprene
Reinforcement:	Four alternating layers of spiralled high-tensile steel wire for the SHR5000-16 (1") and SHR3650-32 (2"). Six alternating layers of spiralled high-tensile steel wire for the SHR5000-20 (1¼") through SHR5000-32 (2").
Cover	Black Neoprene, Pin Pricked
Temperature:	-40ºF to 250ºF (-40ºC to 121ºC)
Fitting Reference:	All fittings compatible with Prospector Slim Hole Rotary Hose family are listed on the attached section of this specification sheet.
Packaging:	1" available in 50 FT Box or 200 FT Coil. 1¼," 1½," & 2" available in 131 FT Continuous Coils
Couplings:	Swage-on coupling; contact coupling manufacturer
Order Codes:	543-827 543-710 (ARC Treatment)

Hammer Unions,
Nut, Male Sub, Female Sub and Seals

Windlass offers a wide range of standard and sour gas hammer unions. Each union whether standard or sour gas is carefully inspected to assure long, dependable service even under extreme conditions.

• Three lug nuts and self-locking ACME threads provide quick make-up and break-out.
• Color coded for quick identification.
• Unique identification for sour gas unionsSome include elastomer seal depending on size, pressure rating and style.
• Meet or exceed National Association of Corrosion Engineers standard NACE MR-01-75 and API RP-14E.
• All materials used meet ASTM and/or AISI standards.
• All unions provide pressure-tight & positive sealing for low-pressure services (1,000 to 2,000 PSI).
• The spherical surface male sub and angular surface female sub form a metal-to-metal seal, the ball and tangent provides a perfect seal.
• Range from 1” to 12” with cold working pressures from 1,000 to 20,000 PSI.

Hammer Unions
Specifications for Threaded and Butt Weld Hammer Unions

Integral Fittings Quick Reference Chart

 

Integral Fittings Dimensions

NOTE: The product data on the web site is based on catalog information from the manufacturer.
JGB is not responsible for any errors or changes to that data made by the manufacturer.