Nipple Manifold Female connection

The Multi-Snap coupling and nipple manifolds are available in a large number of sizes and connection alternatives. Up to eight cooling circuits can be connected and disconnected simultaneously.

Easy Connection - Due to the unique design of CEJN couplings, an easy push-to-connect action is all that is required to connect the two manifolds.
Easy to Disconnect - Automatic disconnection, by simply pulling the female manifold
Correct Connection - The design of the two manifolds ensures correct connection of the hoses.
No Leakage - Both coupling and nipple halves are self-sealing when disconnecting.
High Flow Capacity - The patented valve mechanism provides a nearly unobstructed flow, and ensures proper cooling of the molds.
Corrosion Resistant - Both couplings and nipples are made of chrome plated brass and stainless steel for reliable and long service.


Technical data for the Quick Connect Couplings

Multi-Snap, Size 1
Nominal flow dia: 6.2 mm, 1/4"
Flow capacity: Δ p = 1 bar, 14.5 PSI, 19 l/min, 5 GPM
Max. working pressure: 15 bar, 217 PSI
Temperature range: -30C to +100C
Seal material: Nitrile as standard other seal materials on request
Material manifold: Aluminium, anodized
Material coupling/nipple: Brass, chrome plated



Multi-Snap, Size2
Nominal flow dia: 8.9 mm, 11/32"
Flow capacity: Δ p =1 bar, 14.5 PSI, 32 l/min, 8.5 GPM
Max. working pressure: 15 bar, 217 PSI
Temperature range: -30C to +100C
Seal material: Nitrile as standard other seal materials on request
Material manifold: Aluminium, anodized
Material coupling/nipple: Brass, chrome plated