Hose and Hose Assemblies. JGB's Hose, Fitting, and Valves CatalogJGB Enterprises Inc. celebrates its 35 years. The owner, Jay G Bernhardt, founded the company in 1977 and  we have grown the company into a leading defense contractor and commercial supplier in hoses and fittings
Request a Quote
Search Website  

Parker Industrial STEAM-LANCE 250 EPDM Steam Hose - Series 7263E, 7264

Hose VendorApplicationPhotograph
Parker Industrial Steam Hose 
Parker Industrial  STEAM-LANCE 250 EPDM Steam Hose - Series 7263E, 7264
Click to view a full size photo
Application:STEAM-LANCE® 250 EPDM Steam Hose
Series 7263(E) (Black) and Series 7264 (Red)

  • Saturated and superheated steam
  • Cleaning containment vessels and manufacturing equipment; cleaning and heating process equipment
  • Manufacturing and processing plants, refineries

Series 7263(E)/7264 is a traditional hose designed for long-lasting steam service, one of the toughest applications for hose, where the hot/cold wet/dry cycling attacks rubber compounds externally as well as internally. The hose construction incorporates an EPDM tube that resists heat and popcorning, and a wire braid reinforcement for crush-resistant durability, kink resistance and a path to conduct a static electrical charge to ground. The EPDM cover is resistant to abrasion, cracking, hardening and ozone; the red cover of 7264 provides color-coded identification.

Design Factor:  10:1
Vacuum:  Not recommended
Industry Standards:  None applicable
Construction
   Tube:Black EPDM
   Reinforcement:Multiple Wire Braids
   Cover:Black or red EPDM; perforated wrapped finish
Temperature:-40°F to +406°F saturated steam/+450°F superheated steam
(-40°C to +208°C saturated steam/+232°C superheated steam)
Packaging:Cartons, reels
Branding:PARKER SERIES (7263) (7264) STEAM-LANCE® 250 PSI MAX WP MADE IN USA (DATE CODE)
Couplings:Contact JGB for proper fitting recommendation and coupling procedure.
Colors:Black or Red
Part No. ID ID Reinf
Plies
OD OD Approx Wt Min Bend Rad Max Rec WP Std Pack Request Quote
(in) (mm) (in) (mm) (lbs/ft) (in) (psi) Qty (ft)
7263-1002 1 25.4 2 1.593 40.5 0.85 12 250 50 Request Quote
7263-1002A 1 25.4 2 1.593 40.5 0.85 12 250 500 Request Quote
7263-1252 1-1/4 31.8 2 1.875 47.6 1.14 16.5 250 50 Request Quote
7263-502 1/2 12.7 2 1.031 26.2 0.48 7 250 50 Request Quote
7263-502A 1/2 12.7 2 1.031 26.2 0.48 7 250 500 Request Quote
7263-752 3/4 19.1 2 1.343 34.1 0.66 9.5 250 50 Request Quote
7263-752A 3/4 19.1 2 1.343 34.1 0.66 9.5 250 500 Request Quote
7263E-1502 1-1/2 38.1 2 2.19 55.6 1.44 20 250 50 Request Quote
7263E-2002 2 50.8 2 2.67 67.8 1.76 25 250 50 Request Quote
7264-1002 1 25.4 2 1.593 40.5 0.88 12 250 50 Request Quote
7264-502 1/2 12.7 2 1.031 26.2 0.5 7 250 50 Request Quote
7264-502A 1/2 12.7 2 1.031 26.2 0.5 7 250 500 Request Quote
7264-752 3/4 19.1 2 1.343 34.1 0.7 9.5 250 50 Request Quote
7264-752A 3/4 19.1 2 1.343 34.1 0.7 9.5 250 500 Request Quote

Warnings!

  • Failure to properly inspect, maintain, test and use steam hose assemblies may result in property damage, personal injury or death. Refer to ARPM publication IP-11-1, "Guide for Use, Testing and Inspection of Steam Hose."
  • Water changes to hot water and phases of steam when subjected to heat and pressure. The greater the pressure, the higher the temperature required to achieve and maintain a steam phase. If steam escapes, dangerous quantities of heat may be released very suddenly. Exposure to hot water, low pressure steam and high pressure steam may cause severe scalding or fatal burns.
  • Use only hoses designated for steam service for steam applications.
  • Prior to use with detergents or rust inhibitors, contact JGB.
  • Drain steam hose after each use to reduce the possibility of hose popcorning while in service.
  • Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.