| Application: | Cold and hot water up to 212°F (100°C) where steam is injected into the water.
Used for paper mill, food
handling or processing plant washdown service requiring hose with a non-marking cover.
CAUTION: NOT RECOMMENDED FOR USE WITH STEAM.
|
| Construction | |
| Tube: | Type P (EPDM). Black.
Type D (SBR). Black. For nozzle only. |
| Reinforcement: | Synthetic, high tensile textile cord.
Braided, high tensile synthetic textile cord. For nozzle only. |
| Cover: | Type P (EPDM). White. All sizes are perforated on plain end hose only.
Type D (Natural Rubber). Gray with green stripe. For nozzle only. |
| Temperature: | -40°F to +212°F (-40°C to +100°C) continuous service.
-20°F to +180°F (-29°C to +82°C) continuous service. For nozzle only. |
| Packaging: | 1/2": Packaged in 600’ to 800’ reels. Maximum 4 pieces. Minimum length 25’.
3/4" and 1": Packaged in 300’ to 400’ reels. Maximum 3 pieces. One length 25’ to 50’. Maximum of 2 lengths under 100’.
50’ lengths (with nozzle): Packaged each length coiled and wrapped in polyethylene.
50’ lengths (without nozzle): Packaged 50’ coiled in a carton.
|
| Branding: | Continuous ink print label. Example: "GATES® WASHDOWN 3/4 INCH (19.1mm) 200 PSI (1.38MPa) WP MADE IN U.S.A."
Continuous transfer label. Example: "GATES® WASHDOWN 3/4 INCH (19.1mm) 150 PSI (1.03MPa) WP MADE IN MEXICO" |
| Couplings: | Contact JGB for proper hose fitting requirements. |
| Category: | Pressure Washer Hose |
| Colors: | Black with white cover on plain hose end and gray cover with green stripe for nozzle only |
January, 2013 - JGB Makes MDM's List of Top 5 Largest Hose Distributors
