Reducer / Increaser

Part Name	Manufacturer	Photograph
Jump Size "King" Combination Nipples	Dixon
Plated Steel Hose Shank x Male NPT 316 Stainless Steel Hose Shank x Male NPT Hose Shank Male NPT Part # Hose Shank Male NPT Part # 3/4" 1" STC0510 3/4" 1/2" RST0501 1" 3/4" STC1005 3/4" 1" RST0510 1" 1-1/4" STC1015 1" 3/4" RST1005 1-1/4" 1" STC1510 1" 1-1/4" RST1015 1-1/4" 1-1/2" STC1520 1-1/4" 1" RST1510 1-1/2" 1-1/4" STC2015 1-1/4" 1-1/2" RST1520 1-1/2" 2" STC2025 1-1/2" 1-1/4" RST2015 2" 1-1/2" STC2520 1-1/2" 2" RST2025 2" 2-1/2" STC2530 2" 1-1/2" RST2520 2-1/2" 2" STC3025 2" 3" RST2535 2-1/2" 3" STC3035 3" 2" RST2525 3" 2-1/2" STC3530 ---- ---- ---- 3" 4" STC3540 ---- ---- ---- 4" 3" STC4035 ---- ---- ---- Safety Alert Hose nipples, made from tubular stock, to fit straight end hose. Threaded end, in all styles, has male NPT thread. Combination nipples are recommended for low-pressure discharge and suction service for compatible liquids. Not for compressible products such as air or nitrogen on sizes 1-1/4" and above. The working pressure of combination nipples will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. In accordance with the RMA bulletin for Oil Suction and Discharge hose, a coupled length of hose, in any size should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement. "King" Combination Nipples are not recommended for steam. Plated Steel Hose Shank x Male NPT Hose Shank Male NPT Part # 1-3/4" 2" STC175200

First | Previous | Next | Last | Back to Top