| | Stepless® Ear Clamps| 304 Stainless Steel | |  |
|
| Hose Clamps | Dixon |
|
Nominal.Size |
Inches |
Part# |
Pkg.Qty |
| |
Closed |
Open |
-- |
|
|
9/32" |
0.228 |
0.275 |
983 |
100 |
|
3/8" |
0.307 |
0.374 |
986 |
100 |
|
7/16" |
0.378 |
0.445 |
989 |
100 |
|
1/2" |
0.425 |
0.524 |
993 |
100 |
|
35/64" |
0.453 |
0.551 |
997 |
100 |
|
9/16" |
0.472 |
0.571 |
999 |
100 |
|
5/8" |
0.520 |
0.618 |
1005 |
100 |
|
11/16" |
0.571 |
0.669 |
1009 |
100 |
|
3/4" |
0.654 |
0.779 |
1021 |
100 |
|
13/16" |
0.701 |
0.827 |
1029 |
100 |
• 304 Stainless Steel
• Assured clamping seal
• For low durometer and/or thin-walled hose/tubing
• Perfected for silicon, vinyl, polyurethane or other high-tech materials
used
in all industries
• Once installed, smooth inner band circumference prevents damage to the
hose while the unique tongue-in-groove design provides a 360° seal
• There are no steps or gaps inside the clamp
|
Technical Information:
Stepless® Ear Clamps hold against pressure and vibration or material shrinkage
due to temperature changes or aging. A built-in spring action permits the
clamp to "breathe" without loosening. When installing Stepless® Ear Type
Clamps over an object, please note that each ear must be crimped closed
to obtain a proper seal.
Once installed and clamped, any tampering is easily visible - clamps are
not reusable - they should not be pried open - doing so renders the clamps
nonfunctional.
Note:
When ordering Stepless® Ear Clamps, select the nominal size nearest to,
but always larger than, the outside diameter of the material to be clamped.
That outside diameter should be determined with connection fully assembled. |
|
|
