Couplings by Vendor | Dixon Worm Gear Clamps

Couplings by Vendor

Dixon

Dixon Worm Gear Clamps

Request a Quote

Printable version

Description

Photograph

Style HS Clamps / Style HSS Clamps

Coupling Category

Manufacturer

Hose Clamps

Dixon

Style HS Clamps					Style HSS Clamps
--	Diameter.Range		--	--	--	Diameter.Range		--	--
1/2".Band Width	From:	To:	Part#	Master*	1/2".Band Width	From:	To:	Part#	Master*
	7/16"	25/32"	HS6	200		7/16"	25/32"	HSS6	200
	1/2"	29/32"	HS8	200		1/2"	29/32"	HSS8	200
	9/16"	1-1/16"	HS10	500		9/16"	1-1/16"	HSS10	500
	11/16"	1-1/4"	HS12	500		11/16"	1-1/4"	HSS12	500
	13/16"	1-1/2"	HS16	500		13/16"	1-1/2"	HSS16	500
	13/16"	1-3/4"	HS20	500		13/16"	1-3/4"	HSS20	500
	1-1/16"	2"	HS24	500		1-1/16"	2"	HSS24	500
	1-5/16"	2-1/4"	HS28	500		1-5/16"	2-1/4"	HSS28	500
	1-9/16"	2-1/2"	HS32	500		1-9/16"	2-1/2"	HSS32	500
	1-13/16"	2-3/4"	HS36	500		1-13/16"	2-3/4"	HSS36	500
	2-1/16"	3"	HS40	200		2-1/16"	3"	HSS40	200
	2-5/16"	3-1/4"	HS44	200		2-5/16"	3-1/4"	HSS44	200
	2-9/16"	3-1/2"	HS48	200		2-9/16"	3-1/2"	HSS48	200
	2-13/16"	3-3/4"	HS52	200		2-13/16"	3-3/4"	HSS52	200
	3-1/16"	4"	HS56	200		3-1/16"	4"	HSS56	200
	3-5/16"	4-1/4"	HS60	200		3-5/16"	4-1/4"	HSS60	200
9/16".Band Width	3-9/16"	4-1/2"	HS64	200	9/16".Band Width	3-9/16"	4-1/2"	HSS64	200
	1-7/8"	5"	HS72	100		1-7/8"	5"	HSS72	100
	2-1/2"	5-1/2"	HS80	100		2-1/2"	5-1/2"	HSS80	100
	3-1/8"	6"	HS88	100		3-1/8"	6"	HSS88	100
	3-5/8"	6-1/2"	HS96	100		3-5/8"	6-1/2"	HSS96	100
	4-1/8"	7"	HS104	100		4-1/8"	7"	HSS104	100
	5-5/8"	8-1/2"	HS128	100		5-5/8"	8-1/2"	HSS128	100
	7-1/8"	10"	HS152	100		7-1/8"	10"	HSS152	100
	9-3/8"	12-1/4"	HS188	100		9-3/8"	12-1/4"	HSS188	100
	10-1/8"	13"	HS200	100		10-1/8"	13"	HSS200	100
	10-7/8"	13-3/4"	HS212	100		10-7/8"	13-3/4"	HSS212	100
	11-5/8"	14-1/2"	HS224	100		11-5/8"	14-1/2"	HSS224	100
	12-3/8"	15-1/4"	HS236	100		12-3/8"	15-1/4"	HSS236	100
	13-1/8	16"	HS248	100		13-1/8"	16"	HSS248	100
	17-1/8	20"	HS312	100		17-1/8"	20"	HSS312	100
Combination 5/16" Hexagon and Screwdriver Slotted Screw. SAE 300 series stainless band and housing with SAE 1018 case hardened Steel, Zinc plated and Chromate Dips crew. Upgraded to four piece construction.					All stainless construction 5/16" Hexagon and Screwdriver Slotted Screw. Marine Grade SAE 300 series stainless band and housing with SAE 305 series stainless screw. Upgraded to four piece construction.
Now upgraded to all 300 Stainless Steel. Clamps previously sold as HAS are now HSS clamps. This clamp meets old Mil Spec WW-C-440B, which has been cancelled, and the new governing spec for hose clamps is SAE J1508. Maximum Recommended Torque 30 in. lbs.

First | Previous | Next | Last | Back to Top