Dixon / Air King Universal Couplings
| | |  |
|
| Air Fittings and Accessories | Dixon |
| Hose Ends |
| Size (in) |
Iron Part # |
Brass Part # |
316.Stainless Steel Part
# |
| 3/8 |
AMH |
ABH |
RAMH |
| 1/2 |
AM1 |
AB1 |
RAM1 |
| 5/8 |
AM5 |
AB5 |
- |
| 3/4 |
AM6 |
AB6 |
RAM6 |
| 1 |
AM11 |
AB11 |
RAM11 |
| Male NPT Ends |
| Size (in) |
Iron Part # |
Brass Part # |
316 Stainless Steel Part
# |
| 1/4 |
AMB1 |
ABB1 |
- |
| 3/8 |
AMB |
ABB |
RAMB |
| 1/2 |
AM2 |
AB2 |
RAM2 |
| 3/4 |
AM7 |
AB7 |
RAM7 |
| 1 |
AM12 |
AB12 |
RAM12 |
| Female NPT
Ends |
| 1/4 |
AMC1 |
ABC1 |
- |
| 3/8 |
AMC |
ABC |
RAMC |
| 1/2 |
AM3 |
AB3 |
RAM3 |
| 3/4 |
AM8 |
AB8 |
RAM8 |
| 1 |
AM13 |
AB13 |
RAM13 |
| Triple
Connections |
| Iron Part # |
Brass Part # |
316.Stainless
Steel Part # |
| AM10 |
AB10 |
- |
| Blank Ends |
| AMO |
ABO |
RAMO |
Safety Alerts:
"AIR KING" IS FOR AIR AND WATER SERVICE ONLY
The use of an "Air King" Safety Clip or wire type retainer is
necessary to assure "Air King" Universal Couplings will not become
accidentally disconnected. This guarantees the fittings are properly connected
as pin will not go through holes in mating flanges until couplings are locked in
place. Only one "Air King" Safety Clip or wire type retainer is
required for each "Air King" Universal Coupling.
"Air King" is rated to 150 PSI at ambient temperature (70°
F).
Standard "Air King" fittings come with AWR4 washers.
"Air King" available to meet MIL Spec. WWC - 633D - consult
factory."
WARNING: NEVER USE ANY "AIR KING" COUPLING FOR STEAM SERVICE!
None of Dixon catalog information is to be interpreted to mean that this
type of coupling is suitable for use on steam hose.
|